Rod ends with a female thread SIL6E SKF
Rod ends consist of an eye-shaped head with integral shank that forms a housing for a spherical plain bearing. As a rule, rod ends are
available with left or right-hand female (internal) or male (external) threads.
SKF supplies rod ends with a threaded shank with a right-hand thread as standard.
With the exception of rod ends with the designation suffix VZ019, all rod ends are
also available with a left-hand thread. They are identified by the designation prefix L.
Rod ends are also available for specific applications, for example where a rod end is attached
to the end of a piston rod or at the base of a hydraulic cylinder. For those applications,
SKF manufactures rod ends with slotted shank and a compressible threaded section or with a "welding shank",
means a shank suitable for welding to another component.
Fatigue strength
In all applications where a rod end is subjected to alternating loads, loads that vary in magnitude or where failure of a rod end is dangerous,
make sure that the selected rod end has sufficient fatigue strength.
Specifications
| Principal dimensions d (mm) | 6 |
|---|---|
| Principal dimensions B1 (mm) | 6 |
| Principal dimensions C (mm) | 4.5 |
| Principal dimensions H1 (mm) | 30 |
| Brand | SKF |
| Principal dimensions G (mm) | M 6 |
| UNSPSC | 31171508 |
| Angle of tilt ? | 13 |
| Basic load ratings dynamic C (kN) | 3.4 |
| Basic load ratings static C0 (kN) | 8.15 |
| Principal dimensions d2 (mm) | 22 |
Rod ends consist of an eye-shaped head with integral shank that forms a housing for a spherical plain bearing. As a rule, rod ends are
available with left or right-hand female (internal) or male (external) threads.
SKF supplies rod ends with a threaded shank with a right-hand thread as standard.
With the exception of rod ends with the designation suffix VZ019, all rod ends are
also available with a left-hand thread. They are identified by the designation prefix L.
Rod ends are also available for specific applications, for example where a rod end is attached
to the end of a piston rod or at the base of a hydraulic cylinder. For those applications,
SKF manufactures rod ends with slotted shank and a compressible threaded section or with a "welding shank",
means a shank suitable for welding to another component.
Fatigue strength
In all applications where a rod end is subjected to alternating loads, loads that vary in magnitude or where failure of a rod end is dangerous,
make sure that the selected rod end has sufficient fatigue strength.
Specifications
| Principal dimensions d (mm) | 6 |
|---|---|
| Principal dimensions B1 (mm) | 6 |
| Principal dimensions C (mm) | 4.5 |
| Principal dimensions H1 (mm) | 30 |
| Brand | SKF |
| Principal dimensions G (mm) | M 6 |
| UNSPSC | 31171508 |
| Angle of tilt ? | 13 |
| Basic load ratings dynamic C (kN) | 3.4 |
| Basic load ratings static C0 (kN) | 8.15 |
| Principal dimensions d2 (mm) | 22 |