Loctite 549 - Slow curing methacrylate gasketing product
LOCTITE 549 is an orange, medium strength, slow curing, thixotropic methacrylate gasketing product. It cures in the absence of air at room temperature when confined within close fitting metal parts. It seals rigid metal faces and flanges. The viscosity is 20,000 mPa*s and service temperature -55 to +150°C.
* provides an instant seal to low pressures immediately after assembly of flanges
* slow curing
* thixotropic, high viscosity
* single component - easy and clean to apply
* provides an instant seal to low pressures immediately after assembly of flanges
* slow curing
* thixotropic, high viscosity
* single component - easy and clean to apply
Specifications
| Brand | Loctite |
|---|---|
| UNSPSC | 31201601 |
| Chemical Basis | Methacrylate |
| Colour | Orange |
| Max. gap size | 0.15 mm |
| Service Temperature Range | -55° to +150°C |
| Viscosity | 20,000 mPa-s |
| Tensile Shear Strength | 3,6 N/mm? |
| Fixture time steel | 4 h |
| Substrate to be sealed | For machined, rigid metal flanges |
| Thixotropy | Yes |
| Fixture time aluminium | 5 h |
There are no downloads for this product.
LOCTITE 549 is an orange, medium strength, slow curing, thixotropic methacrylate gasketing product. It cures in the absence of air at room temperature when confined within close fitting metal parts. It seals rigid metal faces and flanges. The viscosity is 20,000 mPa*s and service temperature -55 to +150°C.
* provides an instant seal to low pressures immediately after assembly of flanges
* slow curing
* thixotropic, high viscosity
* single component - easy and clean to apply
* provides an instant seal to low pressures immediately after assembly of flanges
* slow curing
* thixotropic, high viscosity
* single component - easy and clean to apply
Specifications
| Brand | Loctite |
|---|---|
| UNSPSC | 31201601 |
| Chemical Basis | Methacrylate |
| Colour | Orange |
| Max. gap size | 0.15 mm |
| Service Temperature Range | -55° to +150°C |
| Viscosity | 20,000 mPa-s |
| Tensile Shear Strength | 3,6 N/mm? |
| Fixture time steel | 4 h |
| Substrate to be sealed | For machined, rigid metal flanges |
| Thixotropy | Yes |
| Fixture time aluminium | 5 h |
There are no downloads for this product.